|
|
This
box was glassed in to make more clearance for the air cleaner
on the Webber carb.
|
|
|
|
This
is the rear logo. I really like the type but people can't
read it. They pull up closer at stop lights to be able to
read it. I have been rear ended twice because of it. I finally
made the text taller so you could read it easier.
|
|
|
|
The
big red lenses on a red car were just to plain I had to
do something. Glass blue dots were the answer!
|
|
 |
 |
Two
photos of the support bracket I built to help support the
rear of the body and the gas tank. It also helps remove
most of the torque that is on the rear fenders. They are
bolted with stock body bolts into the OEM body mounts in
the shock assem.
|
|
|
|
This
is the "pipe bomb". There are three cars in my area
that have the rear end burned off due to the really poor gas
tank vent system. After seeing how the fuel, on a full tank,
ends up on the tire and then the #3 jug I made this to help
fix the problem. It is a piece of oil resistant pipe that
is capped on the ends with a piece of fuel cell foam inside
one line runs from the tank vent into the bottom of the pipe.
The other line is only about two inches inside of the pipe.
This allows the spilled fuel to be held in the pipe but the
tank still vents normally except when the vent line sucks
air in it sucks the extra fuel out of the pipe and back in
the tank. The pipe is about a foot long. Click
here to see a how to.
|
|
|
|
Where
is that registration?? I wanted some storage space and better
sound. I built this three compartment box to house two 10"
sub's. The middle is a lockable compartment that I also
wired a light in and also the stereo amp is in there.
|
|
